Notes

This does not include the on board lcd and buttons. There is an open merge request to get that working.

The LED bar is currently not working. I'm slowly trying to figure it out. If it do, i'll update.

I plan on building an enclosure for my touchscreen at some point. When I do I'll put a link to it here.

This is the screen I'm using. The viewing angle is kind of limited but that's not a problem for me. It's just an interface for the printer.

This is a link to the STLs on thingiverse. If you use the screen i linked too, you'll have to lightly file away part of the pcb to get a nice tight fit. Don't force the screen in or you'll break it. It should be a nice friction fit, just snug enough to hold it in place.

Don't use a resistive touchscreen. A capacitive touchscreen is much better for this type of thing.

Perhaps it's my lack of knowledge but I was unable to get it to emulate wheel scroll and allow you to click at the same time. It basically acts like a mouse, it's just attached to your screen. You have to use the scroll bars to scroll chrome.